Jak weryfikować sumy kontrolne BarCode'ów i korzystać z odczytu z uwzględnieniem formatu w języku C#

Imports IronBarCode

' Format-constrained read with false-positive removal.
' Limit the decoder to EAN-13 and Code128; checksums are
' validated automatically and failures are silently discarded.
Dim options As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.EAN13 Or BarcodeEncoding.Code128,
    .RemoveFalsePositive = True,
    .Speed = ReadingSpeed.Balanced
}

Dim results As BarcodeResults = BarcodeReader.Read("label.png", options)

Imports IronBarCode

' Format-constrained read with false-positive removal.
' Limit the decoder to EAN-13 and Code128; checksums are
' validated automatically and failures are silently discarded.
Dim options As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.EAN13 Or BarcodeEncoding.Code128,
    .RemoveFalsePositive = True,
    .Speed = ReadingSpeed.Balanced
}

Dim results As BarcodeResults = BarcodeReader.Read("label.png", options)

Imports IronBarCode

' Constrain reads to 1D formats and enable secondary verification.
' ConfidenceThreshold rejects decodes where the ML detector falls below 85%,
' acting as a quality gate for optional-checksum symbologies like Code39.
Dim options As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.AllOneDimensional,
    .RemoveFalsePositive = True,
    .ConfidenceThreshold = 0.85,
    .Speed = ReadingSpeed.Detailed
}

Dim results As BarcodeResults = BarcodeReader.Read("warehouse-rack.png", options)

For Each result As BarcodeResult In results
    ' Each result has passed checksum validation (mandatory formats)
    ' and the 85% confidence threshold, so no additional filtering is needed.
    Console.WriteLine($"[{result.BarcodeType}] {result.Value}  page={result.PageNumber}")
Next

If results.Count = 0 Then
    Console.Error.WriteLine("No valid barcodes found. Possible causes:")
    Console.Error.WriteLine("  - Check digit mismatch (barcode silently rejected)")
    Console.Error.WriteLine("  - Confidence below 85% threshold")
    Console.Error.WriteLine("  - Format not in ExpectBarcodeTypes")
End If

Imports IronBarCode

' Constrain reads to 1D formats and enable secondary verification.
' ConfidenceThreshold rejects decodes where the ML detector falls below 85%,
' acting as a quality gate for optional-checksum symbologies like Code39.
Dim options As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.AllOneDimensional,
    .RemoveFalsePositive = True,
    .ConfidenceThreshold = 0.85,
    .Speed = ReadingSpeed.Detailed
}

Dim results As BarcodeResults = BarcodeReader.Read("warehouse-rack.png", options)

For Each result As BarcodeResult In results
    ' Each result has passed checksum validation (mandatory formats)
    ' and the 85% confidence threshold, so no additional filtering is needed.
    Console.WriteLine($"[{result.BarcodeType}] {result.Value}  page={result.PageNumber}")
Next

If results.Count = 0 Then
    Console.Error.WriteLine("No valid barcodes found. Possible causes:")
    Console.Error.WriteLine("  - Check digit mismatch (barcode silently rejected)")
    Console.Error.WriteLine("  - Confidence below 85% threshold")
    Console.Error.WriteLine("  - Format not in ExpectBarcodeTypes")
End If

Imports IronBarCode

' Constrained read: only Code128 barcodes are returned.
' Faster because the reader skips all other format detectors.
Dim constrainedOptions As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.Code128,
    .Speed = ReadingSpeed.Faster,
    .ExpectMultipleBarcodes = False
}

' Broad read: all supported formats are scanned.
' Useful for verification or when the image format is unknown.
Dim broadOptions As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.All,
    .Speed = ReadingSpeed.Detailed,
    .ExpectMultipleBarcodes = True
}

Dim imagePath As String = "shipping-label.png"

Dim constrained As BarcodeResults = BarcodeReader.Read(imagePath, constrainedOptions)
Console.WriteLine($"Constrained: {constrained.Count} Code128 barcode(s) found")

Dim broad As BarcodeResults = BarcodeReader.Read(imagePath, broadOptions)
Console.WriteLine($"Broad: {broad.Count} barcode(s) found across all formats")

For Each result As BarcodeResult In broad
    Console.WriteLine($"  [{result.BarcodeType}] {result.Value}")
Next

Imports IronBarCode

' Constrained read: only Code128 barcodes are returned.
' Faster because the reader skips all other format detectors.
Dim constrainedOptions As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.Code128,
    .Speed = ReadingSpeed.Faster,
    .ExpectMultipleBarcodes = False
}

' Broad read: all supported formats are scanned.
' Useful for verification or when the image format is unknown.
Dim broadOptions As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.All,
    .Speed = ReadingSpeed.Detailed,
    .ExpectMultipleBarcodes = True
}

Dim imagePath As String = "shipping-label.png"

Dim constrained As BarcodeResults = BarcodeReader.Read(imagePath, constrainedOptions)
Console.WriteLine($"Constrained: {constrained.Count} Code128 barcode(s) found")

Dim broad As BarcodeResults = BarcodeReader.Read(imagePath, broadOptions)
Console.WriteLine($"Broad: {broad.Count} barcode(s) found across all formats")

For Each result As BarcodeResult In broad
    Console.WriteLine($"  [{result.BarcodeType}] {result.Value}")
Next

Imports IronBarCode

' Combine multiple format flags with Or to scan for more than one symbology
' in a single pass. Each BarcodeResult.BarcodeType identifies which format
' was decoded, enabling downstream routing logic per symbology.
Dim options As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.EAN13 Or BarcodeEncoding.Code128,
    .ExpectMultipleBarcodes = True
}

Imports IronBarCode

' Combine multiple format flags with Or to scan for more than one symbology
' in a single pass. Each BarcodeResult.BarcodeType identifies which format
' was decoded, enabling downstream routing logic per symbology.
Dim options As New BarcodeReaderOptions With {
    .ExpectBarcodeTypes = BarcodeEncoding.EAN13 Or BarcodeEncoding.Code128,
    .ExpectMultipleBarcodes = True
}

Imports IronBarCode
Imports System.IO

' Layered validation for retail POS: EAN-13, UPC-A, and UPC-E only.
' Each property adds a distinct filter to the read pipeline.
Dim options As New BarcodeReaderOptions With {
    ' Layer 1: format constraint, accept only retail symbologies
    .ExpectBarcodeTypes = BarcodeEncoding.EAN13 Or BarcodeEncoding.UPCA Or BarcodeEncoding.UPCE,

    ' Layer 2: confidence threshold, reject decodes below 80%
    .ConfidenceThreshold = 0.8,

    ' Layer 3: false-positive removal, runs a secondary verification pass
    .RemoveFalsePositive = True,

    .Speed = ReadingSpeed.Balanced,
    .ExpectMultipleBarcodes = False,

    ' Require 3 agreeing scan lines to reduce phantom reads from noisy images
    .MinScanLines = 3
}

Dim scanFiles As String() = Directory.GetFiles("pos-scans/", "*.png")

For Each file As String In scanFiles
    Dim results As BarcodeResults = BarcodeReader.Read(file, options)

    If results.Count = 0 Then
        ' No barcode passed all validation layers
        Console.Error.WriteLine($"REJECT {Path.GetFileName(file)}: " &
            "no valid EAN-13/UPC barcode (checksum, confidence, or format mismatch)")
        Continue For
    End If

    Dim primary As BarcodeResult = results.First()

    ' Post-read assertion: verify the decoded format matches expectations.
    ' ExpectBarcodeTypes already constrains the reader; this check documents
    ' intent and surfaces unexpected results during future changes.
    If primary.BarcodeType <> BarcodeEncoding.EAN13 AndAlso
       primary.BarcodeType <> BarcodeEncoding.UPCA AndAlso
       primary.BarcodeType <> BarcodeEncoding.UPCE Then
        Console.Error.WriteLine($"UNEXPECTED FORMAT {Path.GetFileName(file)}: " &
            $"got {primary.BarcodeType}, expected EAN-13/UPC")
        Continue For
    End If

    Console.WriteLine($"OK {Path.GetFileName(file)}: [{primary.BarcodeType}] {primary.Value}")
Next

Imports IronBarCode
Imports System.IO

' Layered validation for retail POS: EAN-13, UPC-A, and UPC-E only.
' Each property adds a distinct filter to the read pipeline.
Dim options As New BarcodeReaderOptions With {
    ' Layer 1: format constraint, accept only retail symbologies
    .ExpectBarcodeTypes = BarcodeEncoding.EAN13 Or BarcodeEncoding.UPCA Or BarcodeEncoding.UPCE,

    ' Layer 2: confidence threshold, reject decodes below 80%
    .ConfidenceThreshold = 0.8,

    ' Layer 3: false-positive removal, runs a secondary verification pass
    .RemoveFalsePositive = True,

    .Speed = ReadingSpeed.Balanced,
    .ExpectMultipleBarcodes = False,

    ' Require 3 agreeing scan lines to reduce phantom reads from noisy images
    .MinScanLines = 3
}

Dim scanFiles As String() = Directory.GetFiles("pos-scans/", "*.png")

For Each file As String In scanFiles
    Dim results As BarcodeResults = BarcodeReader.Read(file, options)

    If results.Count = 0 Then
        ' No barcode passed all validation layers
        Console.Error.WriteLine($"REJECT {Path.GetFileName(file)}: " &
            "no valid EAN-13/UPC barcode (checksum, confidence, or format mismatch)")
        Continue For
    End If

    Dim primary As BarcodeResult = results.First()

    ' Post-read assertion: verify the decoded format matches expectations.
    ' ExpectBarcodeTypes already constrains the reader; this check documents
    ' intent and surfaces unexpected results during future changes.
    If primary.BarcodeType <> BarcodeEncoding.EAN13 AndAlso
       primary.BarcodeType <> BarcodeEncoding.UPCA AndAlso
       primary.BarcodeType <> BarcodeEncoding.UPCE Then
        Console.Error.WriteLine($"UNEXPECTED FORMAT {Path.GetFileName(file)}: " &
            $"got {primary.BarcodeType}, expected EAN-13/UPC")
        Continue For
    End If

    Console.WriteLine($"OK {Path.GetFileName(file)}: [{primary.BarcodeType}] {primary.Value}")
Next