AI 코딩 어시스턴트와 IronPrint 사용하기
IronPrint는 Iron Software의 .NET 용 인쇄 라이브러리입니다. C# 코드에서 PDF 파일과 이미지를 프린터로 보내며, Windows, macOS, iOS 및 Android에서 조용히 또는 시스템 인쇄 대화 상자를 통해 인쇄합니다.
인쇄는 많은 문서 기능의 마지막 단계이며, 출력이 기계를 떠나기 때문에 테스트하기 어려운 단계입니다. IronPrint의 문서가 없으면 어시스턴트는 어떤 멤버가 존재하는지 알지 못합니다. 첫 요청 전에 문서를 제공하세요.
모든 어시스턴트는 동일한 네 단계를 필요로 합니다. 패키지를 추가하고, 환경에서 키를 읽고, 어시스턴트에게 IronPrint의 기계 판독 가능한 문서를 제공하고, 작업을 종료하기 전에 각 작업이 포함하는 내용을 검사하세요. 동일한 단계는 조용히 인쇄하기, 이름으로 프린터 선택하기, 인쇄 설정, 및 대화 인쇄하기를 포함합니다.
AI 코딩 어시스턴트와 함께 IronPrint 사용 방법
- NuGet에서 C# 인쇄 라이브러리 다운로드
net9.0-windows와 같은 OS 특정 프레임워크를 대상으로 합니다.- 첫 작업 전에
IronPrint_LICENSE_KEY에서IronPrint.License.LicenseKey를 할당합니다. - 어떤 코드가 작성되기 전에 어시스턴트에게 IronPrint의 llms.txt 색인을 제공합니다.
- 각 세션에서 어시스턴트가 로드하는 파일에 IronPrint 규칙을 저장하세요.
- 모든 프린터 이름을
Printer.GetPrinterNames와 비교하여 각 작업이 전송하는 내용을 확인합니다.
내 AI 어시스턴트가 인쇄를 자체적으로 처리할 수 없나요?
조용히 인쇄하기 가이드는 System.Drawing.Printing 경로를 모든 문서 유형에 대해 페이지 이벤트 핸들러가 있는 PrintDocument로 설명하며, 내장된 PDF 렌더링은 없습니다.
IronPrint의 API는 두 개의 클래스 Printer와 PrintSettings에 중점을 두고 있으며, 3단계에서는 그것들을 설명하는 기계 판독 가능한 문서를 나열합니다.
어시스턴트가 첫 번째 인쇄 호출을 작성하기 전에 세 가지 포인트가 적용됩니다.
- 즉흥적인 인쇄 코드가 비용을 초래합니다: raw
System.Drawing.Printing호출에서 누락된 설정을 재구성하려는 각 시도가 비용을 초래하며, 그 코드는 macOS에서 TypeInitializationException을 발생시킵니다. - 패키지 이름이 중요합니다: NuGet 패키지와 네임스페이스는 모두
IronPrint입니다. Slopsquatting은 언어 모델이 존재하지 않는 패키지에 대해 패키지 이름을 등록하는 것이므로, 프롬프트는 패키지를 정확히 명명해야 합니다. - 라이선스에 정기적인 비용이 없습니다: IronPrint 라이선스는 영구적입니다. 각 라이선싱 페이지의 등급은 개발자, 위치 및 프로젝트 허용량을 설정합니다.
1단계: IronPrint 설치
어시스턴트에게 패키지를 추가하고 해결된 버전을 명명하도록 요청합니다.
Add IronPrint version 2026.10.1 from NuGet to this project and restore packages.
Then tell me which IronPrint version the restore resolved.
.NET CLI 명령은 동일한 릴리스를 고정합니다.
dotnet add package IronPrint --version 2026.10.1
대상 프레임워크는 패키지가 사용하는 인쇄 경로를 결정합니다. net9.0-windows 빌드는 IronPrint의 WPF 인쇄 경로를 로드하고, Windows에서의 일반 net9.0 빌드는 System.Drawing.Printing 기반 경로를 로드합니다. 두 경로는 동일한 프린터에 대해 다른 트레이 이름을 보고합니다. Adobe PDF의 경우, WPF 경로는 AutoSelect를 반환했지만, 일반 빌드는 Automatically Select와 OnlyOne을 반환했습니다. macOS는 net9.0-macos 또는 net9.0-maccatalyst 타겟과 일치하는 워크로드가 필요하며, Linux는 지원되는 인쇄 플랫폼이 아닙니다.
2단계: 라이선스 키를 적용하세요
키가 없으면 프로그램은 여전히 프린터와 트레이를 나열할 수 있지만, PrintAsync는 작업이 생성되기 전에 Production License Required라는 메시지와 함께 IronSoftware.Exceptions.LicensingException을 발생시킵니다. Print는 System.AggregateException으로 같은 예외를 발생시킵니다. 잘못된 키가 있으면 메시지 대신 License Key Not Recognized입니다. 따라서 라이선스가 없는 프로그램은 워터마크가 있거나 없는 결과가 전혀 나오지 않습니다. 아래 양식은 무료 체험 키를 발급합니다.
오늘 무료 체험으로 프로젝트에서 IronPrint 사용을 시작하십시오.
애플리케이션이 시작될 때, 첫 IronPrint 호출 앞서 키를 한 번 설정합니다. 키는 환경 변수에서 나오므로 커밋에는 포함되지 않습니다.
IronPrint.License.LicenseKey = Environment.GetEnvironmentVariable("IRONPRINT_LICENSE_KEY");
유효한 키가 할당되면, IronPrint.License.IsLicensed는 true를 반환합니다. IronPrint.License.IsValidLicense는 어떤 키 문자열도 테스트합니다. 라이브러리는 자체적으로 IRONPRINT_LICENSE_KEY를 읽지 않으며, 이 기사의 프로브에서, 할당 없이 변수를 설정하면 IsLicensed가 false로 남았습니다.
3단계: IronPrint의 LLM 문서에 어시스턴트를 지향하세요
- llms.txt는 각 한 줄로 43 페이지를 색인합니다. 모든 새 세션에 포함하세요.
- llms-full.txt는 33개의 문서 페이지 각각의 요약을 하나의 파일로 보유합니다.
- llms-full-catalog.txt는 블로그 기사를 포함한 색인입니다.
- 객체 참조는 모든 멤버의 서명을 제공합니다.
- 스킬 파일을 읽는 도구는 skill.md를 로드할 수 있습니다. 그 섹션에는 설치, 라이선싱, 인쇄 레시피, 플랫폼 배포 및 알려진 오류에 대한 수정 방법이 포함되어 있습니다.
- AI 제품 팩트 시트는 지원 플랫폼 및 주요 사용 사례를 나열합니다.
작업이 특정 가이드에 의존하는 경우, 어시스턴트를 그 페이지로 안내하세요.
색인을 보내고 그것 안에 머물라는 지시를 함께 보내세요.
Read https://ironsoftware.com/print/csharp/llms.txt first, before writing any IronPrint code.
Work only from what those pages document.
IronPrint's API is small, and it fits together like this:
- Printer is static, with Print, PrintAsync, ShowPrintDialog, GetPrinterNames, and GetPrinterTrays.
- PrintSettings holds the printer name, PaperSize, PaperOrientation, PaperMargins, Dpi, and copies.
- It also has the grayscale switch.
- There's no document object to build. You pass a file path or the file's bytes.
Look up any member those pages don't show.
The API reference is https://ironsoftware.com/print/csharp/object-reference/api/.
Compile once to confirm the call exists.
If it's still doubtful, tell me instead of guessing.
Then check this project's IronPrint calls against the docs and list any they don't cover.
불확실한 멤버에 대한 줄은 어시스턴트가 멤버를 발명하는 대신 간극을 보고하도록 허용합니다.
4단계: 프로젝트에 IronPrint 컨텍스트 추가하기
채팅 지침은 세션과 함께 끝나므로 IronPrint 규칙은 매번 도구가 읽는 프로젝트 파일에 넣습니다. Claude Code는 CLAUDE.md를 로드하고, ChatGPT Codex는 AGENTS.md를 로드하며, GitHub Copilot 파일은 .github/copilot-instructions.md입니다. Cursor는 .mdc 규칙을 .cursor/rules/에서와 AGENTS.md를 로드하고, Google Antigravity는 AGENTS.md 또는 GEMINI.md를 로드합니다. 동일한 텍스트가 각 파일에서 작동하며, Cursor 규칙에는 MDC 프론트매터가 추가됩니다. 이 블록에서 시작하세요.
All printing in this project goes through IronPrint.
`IronPrint` is the name of both the NuGet package and the namespace.
Follow these rules in all printing code:
- Read the documentation index first at https://ironsoftware.com/print/csharp/llms.txt.
- Tools that accept skill files load https://ironsoftware.com/print/csharp/skill.md.
- Target an OS framework such as `net9.0-windows`, not plain `net9.0`.
- Set `IronPrint.License.LicenseKey` from IRONPRINT_LICENSE_KEY at startup.
- The key never goes to output, logs, or source control.
- Take printer names from `Printer.GetPrinterNames` and match them exactly.
- Refuse any other name. IronPrint sends an unknown name's job to the default printer.
- Use `Printer.PrintAsync` in UI code. `Printer.Print` blocks the thread that calls it.
- Print PDF, PNG, JPG, BMP, or TIFF. GIF and HTML files throw an unsupported file type error.
- Leave `PaperOrientation` on `Automatic` for mixed pages.
- `Portrait` shrinks a landscape page onto a portrait sheet.
- Read tray names in the build that prints. They differ between framework targets.
- Do not add a second printing library. If IronPrint cannot do something, say so.
스킬 파일의 단일 파일 예시는 여전히 2026.8.1 IronPrint를 고정하는데, 여기서 테스트한 2026.10.1 패키지보다 두 릴리스 이전입니다.
5단계: 원샷 설정 프롬프트
이 프롬프트는 1단계에서 4단계를 하나의 메시지로 결합하여 프로젝트나 세션이 시작될 때 발송합니다.
Get this project ready for printing with IronPrint, under these rules:
- Reference the IronPrint NuGet package at version 2026.10.1.
- Target net9.0-windows or another OS-specific framework, not plain net9.0.
- Assign IronPrint.License.LicenseKey from the IRONPRINT_LICENSE_KEY environment variable.
- Do that at startup, before any other IronPrint call.
- Keep the key out of the console, the logs, and anything committed.
- Read https://ironsoftware.com/print/csharp/llms.txt before coding, and stay within it.
- For members it doesn't cover, search https://ironsoftware.com/print/csharp/object-reference/api/.
- Build before you rely on a member you found there.
- Where the tool takes skill files, load https://ironsoftware.com/print/csharp/skill.md.
- Trust the compiler over the skill file when they disagree.
- Only pass a printer name that Printer.GetPrinterNames returned.
Save these rules in the instructions file that later sessions read.
Then name the file you wrote, and any other change you made.
6단계: 작동하는 코드를 생성하는 프롬프트 패턴
프린터 이름이 어디에서 오는지, 인쇄할 파일 형식, 그리고 모든 인쇄 설정을 명시하세요.
모호함 청구서를 IronPrint로 인쇄하세요.
더 나은 구성에서 프린터 이름을 가져오고,
Printer.GetPrinterNames에 나타나는지 확인한 다음, invoice.pdf를PrintSettingsA4, 자동 세로 설정, 회색조, 두 복사본으로 인쇄합니다.
IronPrint 릴리스 이름과 코드가 대상이 되는 프레임워크를 명명하세요.
더 나은 IronPrint 2026.10.1을 net9.0-windows에 사용하고 첫 작업 전에 IronPrint_LICENSE_KEY에서 키를 할당합니다.
전체 파일을 요청합니다. 조각은 using IronPrint; 지시문과 키를 할당하는 줄을 생략할 수 있습니다.
더 나은 모든 using 지시문과 라이선스 할당이 포함된 Program.cs 전체를 반환하여 편집 없이 빌드할 수 있도록 합니다.
7단계: 되돌아온 것을 검증하기
2026.10.1로 프로브한 결과 각 실수 뒤의 동작을 측정했습니다.
- 확인되지 않은 프린터 이름: 설치된 프린터와 일치하지 않는 이름은 오류를 발생시키지 않습니다. 우리의 테스트에서,
PrintAsync는 예외를 발생시키지 않았으며, 작업은 기본 프린터인 Microsoft Print to PDF로 갔으며, 사람이 '다른 이름으로 저장' 대화 상자에 응답할 때까지 보류되었습니다.Printer.GetPrinterNames가 반환한 이름만 허용합니다. - UI 스레드에서의
Print: 동기 호출은 호출하는 스레드를 차단하여 중단 문제 해결 페이지에서 설명된 대로 WPF 및 WinForms 인터페이스를 정지시킵니다.PrintAsync을 사용하세요. - 프롬프트가 있는 테스트 프린터: Microsoft Print to PDF로 보내진 두 작업은 사람이 파일 이름을 입력한 후에만 완료되었습니다. 무인 테스트는 자체적으로 완료되는 프린터가 필요하거나 다음 섹션의 캡처 방법이 필요합니다.
- 일반 타겟에서의
ShowPrintDialog: 문제 해결 페이지는 호출이 일반 .NET 타겟에서 AggregateException을 발생시킬 수 있다고 말합니다. Windows에서, 일반net9.0빌드는 예외를 발생시키지 않았습니다. 호출은 실제 인쇄 대화 상자를 열고 대화 상자가 닫힌 후 10.1초 후에만 반환되었습니다. 무인 코드에서 대화 호출을 피하세요.
에이전트에게 자신의 작업을 검증하게 하세요
어시스턴트에게 이러한 검사를 실행하고 증거를 보고하도록 요청합니다.
Rebuild in Release and run the app again.
If it has a capture or dry-run mode, use that and send nothing to a real printer.
When it finishes, give me proof:
- List every IronPrint type and member in the code, each with the docs page that covers it.
- Give the value of IronPrint.License.IsLicensed.
- Show where the printer name is checked against Printer.GetPrinterNames.
- For each document, give the printer, the settings sent, and the result.
Say whether the settings each job carried match the settings the code asked for.
IronPrint로 조용히 인쇄 작업하기
Windows에서 IronPrint 2026.10.1은 각 작업을 WPF의 인쇄 대화 상자 클래스에 전달하되, 출력 설정을 가진 인쇄 티켓과 함께 출력하지 않습니다. 시험 패치는 그 호출을 가로채고 각 작업을 XPS 파일로 저장하였으며, 이 섹션의 수치는 종이 없이 측정되었습니다.
- 각 PDF 페이지는
Dpi설정에서 이미지로 렌더링됩니다. 아래 실행에서는 A4 페이지가 150 DPI에서 1240 x 1753 픽셀 이미지로, 프로브에서는 300 DPI에서 2479 x 3508 픽셀 이미지로 변환되었습니다. PaperSize.A4는 210 x 297 mm 페이지를,PaperSize.Letter는 215.9 x 279.4 mm 페이지를 생성했습니다.PaperOrientation.Automatic에서는 가로 방향 페이지는 가로 방향 페이지로 인쇄되었습니다.Portrait에서는 동일한 페이지가 세로 시트에 맞도록 축소되어 상단 부분만 채웠습니다.- 색상 PDF 페이지는
Grayscale이 켜져 있을 때 회색 이미지로 도착했습니다. PNG의 빨간색 텍스트는 빨간색으로 남아 있었으며, 인쇄 티켓만이 모노Chrome 출력을 요청했습니다. NumberOfCopies는 티켓의 복사본 수를 설정했으며 작업은 여전히 한 세트의 페이지를 보유했습니다.
인쇄 설정 가이드는 프린터가 DPI를 제한할 수 있으며 일부 플랫폼은 복사본 수를 무시할 수 있음을 알리므로, 두 값은 드라이버에 대한 요청입니다.
IronPrint로의 파일 형식
2026.10.1에서는 PDF, PNG, JPG, BMP, TIFF 파일이 인쇄됩니다. GIF 및 HTML 파일은 작업이 생성되기 전 지원되지 않는 파일 형식이라는 메시지와 함께 System.IO.InvalidDataException을 발생시키지만, 조용히 인쇄하기 가이드는 두 형식을 나열합니다. 스킬 파일은 작동하는 다섯 형식을 나열합니다. 예를 들어 IronPDF로 HTML을 먼저 PDF로 렌더링하세요.
이미지는 페이지 폭에 맞게 조정된 한 페이지로 인쇄됩니다. 1200 x 800 픽셀 PNG는 가로 A4 페이지에서 Automatic 방향으로 인쇄되었고, 세로 페이지의 윗부분에 Portrait로 인쇄되었습니다.
재생산할 수 있는 결과
테스트는 단일 프롬프트이며, 모든 코드는 어시스턴트에서 나옵니다. 빈 폴더를 만들고, 새 세션을 열고, 프롬프트를 붙여넣고, 통과하는 항목 아래의 목록에 대한 결과를 확인하세요.
IRONPRINT_LICENSE_KEY에 IronPrint 체험판 또는 프로덕션 키, PRINTER_NAME에 설치된 프린터 이름입니다. 프롬프트는 모든 작업을 XPS 파일로 캡처하므로 프린터는 아무것도 받지 않습니다.프롬프트
앱이 자체 테스트 세트를 작성하므로, 테스트 실행에서 여섯 파일이 인쇄 순서에 따라 아래에 조인되었습니다. 네 PDF는 변경되지 않았으며, PNG와 GIF는 각각 자신의 픽셀 크기의 페이지에 나타납니다.
Build a .NET 9 Windows console app that silently prints a batch of documents with IronPrint.
Start in an empty directory and keep deliverables there.
If it holds a project or source files, tell me and stop.
Work alone and note each choice you make.
Work in this order:
1. Pin IronPrint at 2026.10.1 from NuGet and target net9.0-windows with WPF on, for step 4.
2. Read https://ironsoftware.com/print/csharp/llms.txt, mainly its silent printing guide.
3. Follow these code rules:
- Call only IronPrint members that the linked pages document.
- At startup, assign IRONPRINT_LICENSE_KEY to IronPrint.License.LicenseKey. You never need the key.
- Never show the key, list environment variables, or write the key to any file.
- When IronPrint.License.IsLicensed is false, report it and stop.
- Check PRINTER_NAME against Printer.GetPrinterNames before the first job.
- If the list lacks it, stop with a clear message and print nothing.
- Pass IronPrint only printer names from that list.
- Record its trays from Printer.GetPrinterTrays.
4. Send no job to a real print queue. Capture each one to XPS instead:
- IronPrint hands each Windows job to WPF's PrintDialog.PrintDocument.
- Patch it with Lib.Harmony 2.3.6 so your code runs instead.
- Save the paginator and PrintTicket to capture/<name of the file being printed>.xps.
- Note the queue and ticket settings.
- Before the first job, prove the patch with a null paginator that sends nothing.
- That self-test writes no file. Stop if it fails.
- Never clear capture/ at startup.
5. Generate testset/ with your own code and no added package:
- invoice-01.pdf and invoice-02.pdf, one A4 portrait page each.
- report-03.pdf, three A4 portrait pages, and chart-04.pdf, one A4 landscape page.
- label-05.png, 1200 by 800 pixels, and cover-06.gif, 600 by 400 pixels.
- Each page shows its file name and page number in large text.
6. Print them in that order with one PrintSettings object:
- A4, automatic orientation, one copy, grayscale and 150 DPI.
- Send each job with Printer.PrintAsync and time it.
- Record a failed job and move on.
7. Run a Release build with the given PRINTER_NAME.
8. Rerun with PRINTER_NAME set to No Such Printer 12345, then set it back.
9. That rerun must stop before any job and leave capture/ unchanged.
10. Write runrecord.md from measured values, one row per test file, with these columns:
- File, source pages counted from the file, and elapsed milliseconds.
- Result, either captured or the exception type and message.
- XPS pages read back from the file, each with width and height in millimeters and orientation.
- The ticket's queue, copy count, page size, orientation, color and resolution.
11. Below the table, give these values:
- IsLicensed, the self-test result and the printer's trays.
- Where the code stops if IsLicensed is false, without touching the key.
- What the No Such Printer 12345 run printed, and whether capture/ changed.
12. Tell me the build result, jobs captured out of six, cover-06.gif's outcome and your assumptions.
산출
실행의 편집되지 않은 실행 기록은 여섯 파일 각각의 측정 값을 제공합니다.
캡처가 작성한 모든 페이지는 아래 PDF에 인쇄 순서대로 있습니다.
IronPrint가 작업을 생성한 대로 배치 출력, 프린터 대신 XPS 파일로 캡처되고 페이지당 PDF로 변환되어 편집 없이 저장되었습니다.
- net9.0-windows Release 빌드는 0개의 경고와 0개의 오류를 보고했습니다.
- 패치는 null paginator로 자체 테스트를 통과하였으며, 파일을 작성하지 않았습니다.
- 여섯 작업 중 다섯은 캡처되어 총 7페이지였습니다.
- 세로 방향 PDF 3개는 각각 소스 페이지당 하나의 210 x 297 mm 페이지로 변환되었습니다.
- 가로 방향 PDF와 PNG는 297 x 210 mm 가로 페이지로 변환되었습니다.
- 모든 티켓은 A4 용지, 1복사, 모노Chrome 출력, 150 x 150 DPI를 지정했습니다.
- GIF는 지원되지 않는 파일 유형 오류로 실패로 기록되었습니다.
- No Such Printer 12345로 실행이 어떤 작업을 하기 전에 중지되었고, 캡처 폴더는 변경되지 않았습니다.
- XPS 파일의 독립적인 읽기는 실행 기록의 모든 수치와 일치했습니다.
- 승인 빌드를 새로 시작하면 동일한 5개의 캡처가 생성되었습니다.
- 키 스캔은 프로젝트 폴더에 라이센스 키 복사본이 없었습니다.
- 설치 프롬프트는 2026.10.1을 고정했습니다.
- 문서 프롬프트는 코드를 변경하지 않았습니다.
- 그것의 답변은 조용히 인쇄하기 가이드와 스킬 파일이 GIF와 HTML에서 동의하지 않음을 보고했습니다.
- 새 CLAUDE.md는 설정 프롬프트의 규칙과 측정된 동작을 받았습니다.
- 자가 검사는 모든 5개의 캡처된 작업에 요청된 설정이 있음을 확인하였습니다.
- 일부 단계는 페이지와 달리 작동했습니다. 승인 프롬프트가 첫 번째로 실행되고 같은 세션에서 1, 3, 5 및 7단계의 프롬프트가 실행되었습니다. 앱은 PRINTER_NAME을 대소문자를 구분하지 않고 일치시키며 프린터 목록에서 정확한 이름을 전달했습니다.
통과 조건
- 코드에 수동 편집 없이 릴리스 빌드가 성공합니다.
IsLicensed가 false일 때나PRINTER_NAME이(가)Printer.GetPrinterNames에 없을 때 앱이 어떤 작업 전에도 중지됩니다.- 모든 인쇄 가능한 파일에는 페이지, 페이지 크기 및 티켓 값이 runrecord.md를 읽을 때 XPS 파일과 일치하는 캡처가 있습니다.
- GIF는 실패로 기록되며 배치는 계속됩니다.
- 프로젝트 파일에는 라이센스 키가 없습니다.
실행 기록
- 모든 실행은 Core i9-14900KF 및 64 GB 메모리를 가진 Windows 11 x64 데스크톱 하나를 사용했습니다.
- 어떤 가이드도 물리적 프린터로 작업을 보내지 않습니다.
- 이 가이드의 프로젝트는
net9.0-windows을 대상으로 하고IronPrint2026.10.1을 고정했으며, 캡처 모드를 위한 Lib.Harmony 2.3.6을 사용합니다. - 가이드의 지속 시간은 페이지의 프롬프트에 대한 기록된 총 시간을 합한 것이며, 이 가이드의 행은 승인 프롬프트만을 수 포함합니다.
- 표의 버전과 모델은 각각의 도구 자체 세션 파일과 실행 로그에서 나왔으며, 별도의 버전 확인에서 나온 것이 아닙니다.
- 마지막 테스트된 2026년 10월 15일, 이 가이드, Claude Code, ChatGPT Codex, GitHub Copilot (프롬프트 1 및 2만) 및 Google Antigravity, 그리고 Cursor의 경우 2026년 10월 16일.
| 가이드 | 보조 및 버전 | 모델 | 기간 (분) |
|---|---|---|---|
| 이 가이드 | Claude Code 2.1.277, 하나의 세션, 권한 프롬프트 해제 | Claude Opus 5 | 23.7 |
| Claude Code | Claude Code 2.1.277, opusplan 별명, 계획 모드에서의 프롬프트 3 | Claude Sonnet 5, Claude Opus 5 계획 프롬프트 3 포함 | 16.4 |
| ChatGPT Codex | Codex CLI 0.160.0, 한 번 앉아서 | GPT-6 Luna | 17.9 |
| GitHub Copilot | Copilot CLI 1.0.95, 월별 할당량에 프롬프트 2에서 중단 | 자동으로 선택된 GPT-6 Luna | 1.5, 프롬프트 1 및 2만 |
| Cursor | Cursor 3.23.23 데스크톱 앱, 계획 모드에서의 프롬프트 3 | Grok 4.7 | 102.8 |
| Google Antigravity | Antigravity CLI 1.3.5, 프롬프트 1 동안 1.3.6으로 업데이트, 프롬프트 1과 5는 /plan으로 보냈으며 권한 프롬프트는 건너뜀 | Gemini 3.8 Flash (높음) | 61.9 |
에이전트별 가이드
각 도구 가이드는 이러한 단계로 하나의 인쇄 작업을 빌드합니다.
- IronPrint와 Claude Code 사용하기는 각 실험실 문서 유형을 이름 지정된 프린터로 라우팅하며, 기계에 없는 이름을 거부합니다.
- IronPrint와 ChatGPT Codex 사용하기는 주문당 복사본 수와 함께 피킹 목록을 인쇄하는 야간 창고 작업에 사용합니다.
- IronPrint와 GitHub Copilot 사용하기는 인쇄 전에 평면화된 PDF 양식 제출서를 인쇄하는 창고 서비스에 사용합니다.
- IronPrint와 Cursor 사용하기는
System.Drawing.Printing에서 IronPrint 인쇄 설정으로 포장 명세서와 레이블 인쇄를 마이그레이션하는 데 사용합니다. - IronPrint와 Google Antigravity 사용하기는 컨트롤러에서 등록 카드를 인쇄하는 호텔 프런트 데스크 웹 앱에 사용합니다.
문제 해결
- WPF 및 WinForms에서 Print() 메서드 중지로 동기 인쇄 중 멈추는 인터페이스에 대한 것입니다.
- 지원되지 않는 타겟 프레임워크에서의 ShowPrintDialog 동작로 일반 타겟 프레임워크에서 대화 호출에 대한 것입니다.
- 혼합 PDF 인쇄 시 페이지마다 다른 방향이 손실됨는 세로 및 가로 페이지가 있는 PDF가 하나의 방향으로 인쇄될 때입니다.
질문?
질문이 있으시면 support@ironsoftware.com으로 문의하세요.
커티스 차우는 칼턴 대학교에서 컴퓨터 과학 학사 학위를 취득했으며, Node.js, TypeScript, JavaScript, React를 전문으로 하는 프론트엔드 개발자입니다. 직관적이고 미적으로 뛰어난 사용자 인터페이스를 만드는 데 열정을 가진 그는 최신 프레임워크를 활용하고, 잘 구성되고 시각적으로 매력적인 매뉴얼을 제작하는 것을 즐깁니다.