AI 코딩 도우미와 함께 IronWord 사용

Curtis Chau
Curtis Chau
업데이트됨: 2026년 10월 26일

IronWord는 Iron Software의 .NET을 위한 DOCX 라이브러리입니다. Microsoft Office 없이도 Word 문서에서 생성, 편집, 스타일링 및 표 생성을 허용하며, 텍스트를 읽을 수 있습니다. 2023년 12월 이후 NuGet에서 제공되며, IronWord는 공공 가이드와 코드 예제를 포함하고 있습니다.

현재 예제는 2026.10.4 릴리스의 동작을 반영하지 않습니다. 이 버전에서는 텍스트 요소의 크기, 색상, 및 굵기가 읽기 전용입니다. 문서 전체 교체는 표 셀에 영향을 미치지 않으며, 문서 전체 텍스트 추출은 표를 제외합니다.

AI 코딩 도구는 두 가지 유형이 있습니다.

  • 도우미는 편집기 내에서 작동합니다. GitHub Copilot의 인라인 제안처럼 줄을 완성하거나 메서드를 재작성합니다.
  • 에이전트는 여러 파일 편집, 빌드 및 프로그램 실행, 검토용 결과 반환과 같은 작업을 관리합니다. 이는 Claude Code, Cursor, ChatGPT Codex 및 Google Antigravity에서 볼 수 있습니다.

두 유형 모두 작업이 텍스트 추가, 스타일링, 표 생성, 플레이스홀더 교체, 또는 텍스트 추출인 경우에도 동일한 설정이 필요합니다. IronWord 패키지를 설치하고, 환경 변수에서 키를 읽으며, 도우미에게 IronWord의 기계 판독 가능한 문서를 제공하고, 저장된 DOCX를 다시 열면 해당 작업이 완료로 간주됩니다.

Claude Code 로고ChatGPT Codex 로고GitHub Copilot 로고Cursor 편집기 로고Google Antigravity 로고

내 AI 도우미가 직접 Word 문서를 처리할 수는 없나요?

문서가 없는 경우 도우미는 다른 DOCX 라이브러리와 이전 IronWord 릴리스를 포함하는 학습 데이터에서 IronWord 코드를 작성합니다. IronWord의 기계 판독 가능한 문서는 현재 API를 제공합니다.

한 페이지의 편지는 간단합니다. DOCX 라이브러리 간 차이는 템플릿, 표 및 대규모 생성에서 나타납니다.

  • 잘못된 문서는 오류 없이 저장됩니다: IronWord는 줄이 이전 단락으로 병합되거나 플레이스홀더가 표 셀에 남아 있을 때 예외를 발생시키지 않습니다. 저장된 파일을 다시 읽어야만 결함이 드러납니다.
  • Raw OpenXML은 각 기능에 대한 저수준 코드를 요구합니다: 실행, 실행 속성, 표 및 섹션 설정은 별개의 XML 요소이며 OpenXML SDK는 각 요소에 대한 클래스를 가지고 있으므로 도우미는 긴 코드를 작성하게 됩니다. 이는 사용자가 유지해야 합니다. IronWord는 이를 하나의 객체 모델로 노출합니다.
  • 패키지 및 네임스페이스는 하나의 이름을 공유합니다: 둘 다 IronWord이며, 모델 타입은 IronWord.Models 아래에 있습니다. 도우미가 추측한 패키지 이름을 등록하는 것을 슬롭스쿼팅이라고 하며, 프롬프트는 정확한 패키지 이름을 제공해야 합니다.
  • 라이선스 약관은 사전에 정의됩니다: IronWord 라이선스는 영구적이며, 라이선스 페이지는 각 계층의 개발자 수, 위치 및 프로젝트 제한을 제공합니다.

단계 1: IronWord 설치

도우미에게 패키지를 설치하라고 요청하세요.

Install IronWord 2026.10.4 from NuGet in this project and restore it.
Then tell me the IronWord version the restore picked.
Text

터미널에서 릴리스를 고정하세요.

dotnet add package IronWord --version 2026.10.4
SHELL

단일 패키지가 Windows, Linux, macOS를 지원합니다. IronWord 2026.10.4는 win-x64, win-x86, linux-x64, osx-x64 및 osx-arm64에 대한 네이티브 레이아웃 엔진을 포함합니다. Docker 설정 가이드는 Ubuntu, Debian 또는 RHEL 기본 이미지를 권장하며 Linux 컨테이너에서 폰트 설치를 다룹니다.


2단계: 라이선스 키를 적용하세요

라이선스가 없는 프로그램도 문서를 생성, 로드, 텍스트 추출 및 메모리에서 단어를 교체할 수 있지만, 저장할 때마다 IronSoftware.Exceptions.LicensingException이 Production License Required라는 메시지와 함께 발생합니다. 이것은 SaveAs 및 Save의 모든 형태, 경로, 스트림 또는 바이트를 포함합니다. 잘못 입력된 키는 License Key Not Recognized로 인해 저장에 실패합니다. 아래에서 무료 체험 키를 요청할 수 있습니다.

오늘 무료 체험으로 프로젝트에서 IronWord 사용을 시작하십시오.

첫 번째 단계:
arrow pointer

IronWord 호출 전에 시작 시 키를 한 번 설정하세요. 환경 변수에서 키를 읽으면 리포지토리 밖에 유지됩니다.

IronWord.License.LicenseKey = Environment.GetEnvironmentVariable("IRONWORD_LICENSE_KEY");
C#

할당된 키가 유효할 때 IronWord.License.IsLicensed는 true이며, IronWord.License.IsValidLicense는 키 문자열을 검사합니다. 예외 클래스는 공개되지 않으므로 Exception을 캐치하고 그 메시지를 읽으세요.

유의 사항: IronWord 라이선스 키에서 Web.config 및 appsettings.json 옵션도 설명합니다.

단계 3: 도우미에게 IronWord의 LLM 문서를 지정하세요

  • llms.txt는 페이지당 하나의 줄을 가지고 있습니다. 각 세션이 시작될 때 도우미에게 제공하세요.
  • llms-full.txt는 46개 문서 페이지 전체의 요약을 하나의 파일에 담고 있습니다.
  • llms-full-catalog.txt는 블로그 기사를 색인에 추가합니다.
  • API 레퍼런스는 각 멤버의 선언을 제공합니다.
  • skill.md는 스킬 파일을 로드하는 도구를 위한 것입니다. 설치, 라이선스, 코드 레시피 및 일반적인 실패 사례 표를 다룹니다.
  • AI 제품 팩트 시트는 지원되는 .NET 대상과 주요 사용 사례를 나열합니다.

작업이 특정 가이드에 의존하는 경우 구체적인 가이드를 명명하세요.

Read https://ironsoftware.com/word/csharp/llms.txt before you touch IronWord code.
Use only what those pages show.

Here's how the object model works:
- A document is a WordDocument made of paragraphs, runs, and tables.
- Styling goes on the run through a TextStyle.
- Nothing reaches disk until the document is saved.

If you need a member the pages don't mention, look it up in the API reference.
It's at https://ironsoftware.com/word/csharp/object-reference/api/.
Build once to prove the call compiles.
If it still looks doubtful, tell me so instead of guessing.
Text

"설명되지 않음"을 답할 권한이 있는 경우, 도우미에게는 메소드를 만들어내는 것 이외의 선택이 있습니다.


단계 4: 프로젝트에 IronWord 컨텍스트 추가

채팅에 입력한 지침은 세션이 끝나면 사라지므로, 도구가 불러오는 프로젝트 파일에 IronWord 규칙을 유지하세요. 그 파일은 Claude Code에서는 CLAUDE.md, ChatGPT Codex에서는 AGENTS.md, GitHub Copilot에서는 .github/copilot-instructions.md, Cursor에서는 .cursor/rules/의 .mdc 파일 또는 AGENTS.md이며, Google Antigravity에서는 AGENTS.md 또는 GEMINI.md입니다. 모든 도구에서 하나의 텍스트 블록만으로 사용 가능합니다. 단, Cursor 규칙 파일은 MDC 프론트매터도 받을 수 있습니다.

All DOCX work in this project uses IronWord.
The NuGet package and its namespace are both `IronWord`.
Model types live in `IronWord.Models`.

Follow these rules for every Word document:
- Start from the docs index at https://ironsoftware.com/word/csharp/llms.txt.
- Load the skill file from https://ironsoftware.com/word/csharp/skill.md.
- Build documents from `Paragraph`, `Run`, and `Table` objects.
- Add each one with `AddParagraph` or `AddTable`.
- `WordDocument.AddText` appends to the last paragraph rather than starting a new one.
- Style a run with `Run.Style = new TextStyle { ... }`.
- Give the style a `TextFont` whenever it sets `FontSize`.
- Size, color, and weight on `TextContent` are read-only.
- `WordDocument.ReplaceText` does not reach table cells.
- Replace placeholders paragraph by paragraph across `doc.Paragraphs`.
- That list includes the paragraphs inside table cells.
- Read body text from top-level paragraphs.
- Read table text from `Tables`, `Rows`, and `Cells`, and cast each cell to `TableCell`.
- `WordDocument.ExtractText` leaves out tables and joins paragraphs without a separator.
- Build a new `WordDocument` for each file you save. A second save writes the body again.
- Set `IronWord.License.LicenseKey` from IRONWORD_LICENSE_KEY at startup.
- Never print the key or write it into a file.
- Reopen every saved document before calling a change done.
- Compare its paragraphs and cells with what was written.
- Do not add a second DOCX library. If IronWord cannot do something, say so.
Markdown

스킬 파일은 측정 값과 적어도 7군데서 일치하지 않습니다. 단일 파일 예제는 여전히 2026.8.1을 사용하고 있으며, 이는 NuGet에서 2026.10.4 패키지 이전의 세 번의 릴리스입니다. 문서 전체 교체를 전 문서 검색 및 교체로 언급하고 있으며, 이는 아래 측정 내역과 모순됩니다. 예제는 문서 모델을 JSON으로 직렬화하며, 이는 2026.10.4에서 테스트된 모든 문서에서 직렬화 오류를 일으켰습니다. 그들은 매개변수가 없는 Save를 단지 바이트를 얻기 위한 방법으로만 제시하고 있지만, IronWord.xml은 이 또한 로드된 문서를 원본 파일로 다시 작성한다고 명시합니다. 스킬 파일은 TextContent.Style를 통해 텍스트를 스타일링하며, 이는 빈 실행 스타일을 저장했습니다. 단계 7은 문서의 텍스트 추가 호출 및 송부된 XML을 다룹니다.


5단계: 원샷 설정 프롬프트

아래 프롬프트는 단계 1에서 4를 하나의 오프닝 메시지로 결합합니다.

Prepare this project for Word document work with IronWord.
Then append these rules to the instruction file your future sessions load:
- Reference the IronWord NuGet package at version 2026.10.4.
- Its namespace is also IronWord.
- The paragraph, run, table, and style types live in IronWord.Models.
- Take IronWord.License.LicenseKey from the IRONWORD_LICENSE_KEY environment variable.
- Assign it before any IronWord call.
- Never print the key, and keep it out of every file you write or commit.
- Fetch https://ironsoftware.com/word/csharp/llms.txt first and code against what it documents.
- Look up any other member in the API reference.
- It lives at https://ironsoftware.com/word/csharp/object-reference/api/.
- Confirm that member in a build before you rely on it.
- Where the tool supports skill files, load https://ironsoftware.com/word/csharp/skill.md.
- Believe the compiler over the skill when they disagree.
- After any change that saves a DOCX, reopen that file with IronWord.
- Compare each paragraph and table cell with the text you meant to write.

Tell me which file you appended them to.
Text
팁: 그 후, Step 4 프로젝트 파일을 열어 규칙이 포함되어 있는지 확인하세요.

6단계: 작동하는 코드를 생성하는 프롬프트 패턴

단락, 스타일링, 표를 지정하세요.

모호함 IronWord로 Word 보고서를 만드세요.

더 나은 방법 제목을 자체 단락으로 추가하며 실행에 볼드 20포인트 Calibri 텍스트 스타일을 적용하고, 각 본문 단락에는 AddParagraph를 사용하고, 그런 다음 메트릭당 한 행의 2열 테이블을 추가하세요.

IronWord 릴리스 및 대상 프레임워크를 명시하세요. 멤버는 릴리스 간에 변경되므로.

더 나은 방법 IronWord 2026.10.4를 .NET 9에서 사용하고, 첫 저장 전에 IronWord_LICENSE_KEY에서 라이선스 키를 설정하세요.

전체 파일을 요청합니다. 스니펫은 문단, 실행, 표 유형이 요구하는 IronWord.Models 지시문이나 키를 설정하는 줄을 생략할 수 있습니다.

더 나은 방법 전체 Program.cs를 돌려보내세요. 지시문 사용과 라이선스 할당을 포함하여, 변경 없이 빌드되도록.


7단계: 되돌아온 것을 검증하기

아래의 각 오류는 2026.10.4에서 재현 가능합니다.

  • 텍스트 요소 스타일링: TextContent의 크기, 색상, 굵기, 및 글꼴 이름은 실제 스타일만 보고하며, Run의 크기와 글꼴 이름도 읽기 전용이어서 할당 시 CS0200을 발생시킵니다. 대신 실행에 TextStyle을 적용하세요.
  • 문서의 고유한 텍스트 추가 호출로 단락을 만드는 것: WordDocument.AddText은 새 단락을 시작하는 대신 마지막 단락에 추가합니다.
  • 전송된 XML을 API로 취급하는 것: 스킬 파일은 에이전트에게 IronWord.xml에서 멤버 이름을 검색하라고 지시하지만, 2026.10.4에서는 해당 파일이 맥이없는 멤버를 문서화하고 있으며, 이는 메소드 사이에 캡쳐-크로스-런(Method Across Runs)과 Document에 대한 Markdown 내보내기가 포함되며, 이는 페이지 범위의 텍스트 추출을 생략하며 컴파일됩니다. 은닉 멤버에 대한 호출은 CS1061 오류를 발생시킵니다.
  • 한 문서를 두 번 저장: 메모리에서 빌드된 문서의 두 번째 저장은 첫 번째 복사본 이후에도 전체 본문을 다시 저장하므로, 세 단락과 한 표가 있는 공고문은 여섯 단락과 두 테이블로 저장됩니다. 저장하는 각 파일에 대해 새 문서를 빌드하세요.
  • 표가 포함된 로드된 문서 편집: 표가 있는 DOCX를 로드하고 저장할 때, 표 내부 또는 이후 단락의 교체는 조용히 손실되며 메모리 상의 문서는 이를 표시합니다. 메모리에서 빌드된 문서와 표가 없는 로드된 문서는 수정 사항을 유지합니다.

에이전트에게 자신의 작업을 검증하게 하세요

에이전트는 동일한 검사 실행과 각 결과를 보고할 수 있습니다.

Rebuild in Release and run it.
If it's a web app, start it in the background.
Call each endpoint that saves or returns a DOCX, then stop the app.

After that, show me the evidence:
- Name each IronWord type and member the code calls, with the docs page where it appears.
- Report the value of IronWord.License.IsLicensed.
- Reopen each DOCX the program produced.
- Count the paragraphs outside tables and the table rows in each file.

For every paragraph and cell in each file, list the text written and the text found.
Say whether the two agree.
Text

IronWord를 사용한 텍스트 추출

2026.10.4에서 추출 호출은 다른 결과를 반환합니다.

  • 문서의 텍스트 추출은 본문 단락을 구분자 없이 연결하고 표 텍스트를 반환하지 않습니다.
  • 그 단락 목록은 문서 순서로 본문 단락과 모든 테이블 셀 단락을 보유합니다.
  • 테이블 행은 인터페이스로 형식화된 셀을 보유하므로, 셀의 텍스트를 읽으려면 각 셀을 TableCell으로 캐스팅하세요.
  • 셀의 자체 텍스트 추출은 단락을 구분자 없이 연결합니다.

제목, 본문 단락 하나, 및 네 행의 테이블로 구성된 보고서의 경우, 단락 목록은 10개의 항목을 반환하며 그 중 8개는 표 셀입니다. 셀 단락은 TableCell 부모를 가지고 있어 독자는 본문 텍스트와 표 텍스트를 분리할 수 있습니다. 텍스트 추출 가이드는 셀을 읽는 방법을 보여줍니다.


IronWord의 플레이스홀더 교체

로드된 공고문은 두 본문 단락과 한 표 셀에 CUSTOMER_NAME을 포함하고 있으며, 첫 번째 본문 사본은 두 실행에 걸쳐 분할되었습니다. IronWord 2026.10.4는 메모리 내에서 그것을 세 가지 방법으로 교체했습니다.

교체 호출본문 단락표 셀
문서 상의 ReplaceText삭글 아다리 단계에 걸쳐 포함된 사본을 포함해 교체됨변경되지 않음
각 Paragraphs 항목에 대한 ReplaceText교체됨교체됨
각 표 셀에 대한 ReplaceText변경되지 않음교체됨

IronWord는 로드 시 인접한 일반 텍스트 실행을 병합하므로, 분할 사본은 로드된 파일에서 교체됩니다. 두 실행에서 메모리에서 생성된 단락도 분할에 걸쳐 교체되었습니다. MERGEFIELD 템플릿의 경우, 따로 합병 API를 다루는 메일 병합 가이드를 확인하세요.


재생산할 수 있는 결과

전체 테스트는 아래 프롬프트이며 도우미가 모든 코드를 작성합니다. 빈 폴더를 열고, 새로운 세션을 시작하고, 프롬프트를 붙여넣으세요. 그런 다음 결과를 What passes 아래의 기준과 비교하세요.

유의 사항: 시작하기 전에, .NET 9 SDK를 설치하고 IRONWORD_LICENSE_KEY에 IronWord 체험판 또는 프로덕션 키를 설정하세요. 조수는 네트워크 접근권한과 터미널 명령 실행 권한이 필요합니다.

프롬프트

Build a .NET 9 minimal API that writes internal report documents as DOCX and reads them back.
Start in an empty directory. If it holds a project file or code, say so and stop.
No one can answer questions, so plan, code, build, run, and repair on your own.
Settle open points sensibly and write each choice down.
Keep every deliverable in the project directory.

Do these steps in order:
1. Install IronWord 2026.10.4 from NuGet as the only DOCX library, and write every DOCX with it.
2. Use only members in https://ironsoftware.com/word/csharp/llms.txt, its guides, or API reference.
3. At startup, assign IRONWORD_LICENSE_KEY to IronWord.License.LicenseKey.

The key follows these rules:
- Never view, print, echo, hard-code, or save it, or list the environment.
- If IronWord.License.IsLicensed is false, report that and stop.

4. Add POST /documents and POST /extract.

POST /documents takes JSON and returns a DOCX built like this:
- The title is one paragraph, bold at 20 point.
- Each body paragraph is its own paragraph.
- Optional label and value rows form a two-column table.
- An absent or empty row list gives no table.

POST /extract takes one DOCX upload and returns JSON with two fields:
- "paragraphs" lists paragraphs outside tables that hold text, in document order.
- "rows" holds one array of cell texts per table row.

5. In process, write 8 DOCX files to testset/ with the /documents code and title style.

The set holds these files:
- letter-01 to letter-03: a title and three body paragraphs.
- report-01 to report-03: a title, one body paragraph, and five label and value rows.
- notice-01 and notice-02: a title, two body paragraphs, and a two-row table.
- After replacement, no title, body paragraph, or table row repeats in the set.
- manifest.json gives each file's title, customer name, and replaced paragraphs and rows.

Build each notice this way:
- Its rows are Reference and an ID you pick, then Customer and CUSTOMER_NAME.
- Body paragraph one is "Dear CUSTOMER_NAME," as the runs "Dear CUSTOMER_" and "NAME,".
- Body paragraph two mentions CUSTOMER_NAME again.
- Extend the /documents code so it takes runs.
- Save the notice as built to pre-replacement/notice-01.docx or pre-replacement/notice-02.docx.
- Replace each CUSTOMER_NAME with its customer name through IronWord's ReplaceText.
- Only then save it to testset/.

6. Before /extract is first called, check each testset file's word/document.xml yourself.

Fix the generator whenever a check fails.
Once /extract code reads a testset file, over HTTP or in process, the testset is final.
Open it as a ZIP with only System.IO.Compression and System.Xml.Linq, and pass these checks:
- The first paragraph's run is bold at 40 half-points.
- Paragraphs outside tables that hold text match the manifest in number and text.
- So do table rows.
- CUSTOMER_NAME and CUSTOMER_ occur nowhere in it.
- Each pre-replacement notice keeps body paragraph one in exactly those two runs.

7. Make /extract read every upload with IronWord, the same way each time.

The /extract code has these limits:
- It uses no other DOCX reader, no ZIP or XML parsing, and not the manifest.
- It holds no title, paragraph, label, value, or customer name as a literal.
- It never picks a reading by comparing it with expected text.
- You may change how it reads between runs. The program may not.

8. Build in Release and launch the API.

Then make these requests in order:
- Send /documents your own title, four rows, and two body paragraphs, none from the testset.
- Save the returned DOCX as report.docx.
- POST report.docx and every testset file to /extract over HTTP.
- Save each raw response body as extract/<file name without .docx>.json.

9. Write roundtrip.md in three parts.

Part one gives each file's step 6 values, with report.docx measured against your request.
Give title size in half-points and placeholders as CUSTOMER_NAME or CUSTOMER_ occurrences.
Part two describes the /extract method and the ReplaceText calls that made the replacements.
Part three is a 50-row table, one row per expected title, body paragraph, and table row.
Its columns are File, Element, Expected text, Text read, and Match, filled this way:
- Element is title, paragraph N, or row N.
- Expected text comes from the manifest or the request.
- Text read is copied from the saved response, wrong or not, or is (missing) if absent.
- A row's text, expected or read, is its label and value joined by ": ".
- So no label, value, ID, or name contains a colon.
- Match needs exactly equal text at the same position.
- An extra or missing paragraph, row, or cell fails all of that file's rows.

10. Until all 50 rows match, study the failing responses and change the /extract method.

Each pass follows these rules:
- Rebuild and rerun after each change.
- Keep only the latest responses in extract/.
- Stop after the sixth run that still fails.

11. Finish with a short summary that gives me these things:
- The Release build result and rows matched out of 50.
- The /extract method, the step 6 values, and each assumption you relied on.
- If the sixth run fails, the failing rows, each method tried, and what you think causes them.
Text

산출

수행되지 않은 실행의 라운드 트립 테이블은 모든 11개 파일과 50개 행의 측정된 값을 나열합니다. report.docx는 POST /documents가 반환한 문서입니다.

  • 각 교체 전 공고문은 3개의 플레이스홀더를 포함하고 있으며, 인사는 "Dear CUSTOMER_" 및 "NAME,"으로 실행되었습니다.
  • 각 저장된 공고문은 플레이스홀더를 포함하지 않았으며, 인사는 두 실행으로 남아 두 번째에 쉼표가 있었습니다.
  • 모든 11개 파일은 단계 6 검사를 통과하여 모든 제목이 40 하프포인트로 볼드되었습니다.
  • 모든 50개 행이 추출 엔드포인트의 첫 번째 호출에서 일치하였으므로, 단계 10 복구 루프는 실행되지 않았습니다.
  • Claude Code는 스크래치 문서에서 글꼴 크기와 두 번째 저장 동작을 발견하고 각 공고문을 두 번 빌드했습니다.
  • 추출 엔드포인트는 단락 목록에서 표 셀 단락을 삭제하고 행별로 셀을 읽었습니다.
  • 문서화 프롬프트는 코드를 변경하지 않았고 TableCell.Paragraphs를 API 레퍼런스에서만 찾았습니다.
  • 단계 5는 규칙과 측정된 동작을 새로운 CLAUDE.md에 적었습니다.
  • 자체 검사는 11개 파일의 모든 87개 단락과 셀을 일치시켰습니다.
  • 저장된 파일에 대한 자체 검사는 모든 요건을 통과했습니다.
  • 릴리스 빌드의 새 시작은 동일한 9개의 응답을 반환했습니다.
  • 일부 단계는 페이지와 달리 작동했습니다. 단계 1, 3, 5 및 7의 프롬프트는 승인을 받는 프롬프트 후, 같은 세션에 나왔습니다. 승인 프롬프트 동안 Claude Code가 시작한 API가 재구성을 차단하여, Claude Code는 이를 재시작하고 50개 중 50개를 다시 맞췄습니다.

통과 조건

  • 프로젝트는 Release에서 수동 변경 없이 빌드됩니다.
  • 단계 6 값과 50개의 일치하는 행은 저장된 파일을 직접 측정할 때 다시 재현됩니다.
  • 라이선스 키는 프로젝트 폴더의 어떤 파일에서도 나타나지 않습니다.
유의 사항: 다른 릴리스를 시험하려면, 버전 번호를 1단계에 설정하고 IronWord 변경 로그의 항목을 읽으세요.

실행 기록

  • 모든 테스트는 Core i9-14900KF 프로세서와 64GB 메모리를 가진 윈도우 11 x64 데스크톱에서 실행되었습니다.
  • 각 프로젝트는 .NET 9을 대상으로 합니다.
  • 실행은 IronWord 2026.10.1을 사용하였습니다. 프롬프트는 2026.10.4에 고정되어 2026년 10월 12일에 게시되었으며, .NET 8 빌드를 추가하고 CVE-2026-106110에서 CVE-2026-106116까지 해결하며 .NET 8 이상에서 SixLabors.ImageSharp을 4.1.3으로 이동했습니다.
  • 2026.10.4는 2026.10.1과 동일한 공개 API와 동일한 XML 문서를 제공합니다. .NET 9에서 2026.10.4에서의 32개의 프로브 실행은 2026.10.1에서와 동일한 결과를 제공했습니다.
  • 다섯 도구 가이드의 테스트 프로젝트는 xUnit에서 실행되며, Antigravity는 SixLabors.ImageSharp으로 썸네일을 조정했습니다. 이는 IronSoftware.System.Drawing을 통해 IronWord가 참조합니다.
  • 기간은 가이드 페이지의 모든 프롬프트에 대한 기록된 분을 더합니다. 이 가이드의 줄은 승인 프롬프트만을 계산합니다.
  • 마지막 테스트 이 가이드, GitHub Copilot, Claude Code, Google Antigravity, ChatGPT Codex는 2026년 10월 15일에, Cursor는 2026년 10월 12일에 테스트되었습니다.
가이드보조 및 버전모델기간 (분)
이 가이드Claude Code 2.1.277, 하나의 세션, 권한 프롬프트 해제Claude Opus 516.2
Claude CodeClaude Code 2.1.277, opusplan 별명, 계획 모드에서의 프롬프트 3Claude Sonnet 5, Claude Opus 5 계획 프롬프트 3 포함35.4
ChatGPT CodexCodex CLI 0.160.0, 한 번 앉아서GPT-6 Luna43.2
GitHub CopilotCopilot CLI 1.0.95, 검토 프롬프트 3을 계획 모드에서, 그 자체 호출로 검토자동으로 선택된 GPT-6 Luna12.8
CursorCursor 3.23.23 데스크톱 앱, 계획 모드에서의 프롬프트 3Grok 4.723.0
Google AntigravityAntigravity CLI 1.3.5, 권한 프롬프트 생략Gemini 3.8 Flash (높음)43.2

에이전트별 가이드

아래의 각 가이드는 한 도구로 한 Word 문서 작업에서 이러한 단계를 실행합니다.


문제 해결


질문?

질문이 있으시면 support@ironsoftware.com으로 문의하세요.

커티스 차우는 칼턴 대학교에서 컴퓨터 과학 학사 학위를 취득했으며, Node.js, TypeScript, JavaScript, React를 전문으로 하는 프론트엔드 개발자입니다. 직관적이고 미적으로 뛰어난 사용자 인터페이스를 만드는 데 열정을 가진 그는 최신 프레임워크를 활용하고, 잘 구성되고 시각적으로 매력적인 매뉴얼을 제작하는 것을 즐깁니다.

더 읽기

시작할 준비 되셨나요?

NuGet 다운로드 수 62,392버전:2026.11방금 출시